Skip To Content

Learn More About Hammer Drive Anchors

June 2, 2022

Hammer drive anchors are a type of fastener that is used to secure materials to concrete or masonry. They work by expanding when driven into the material, which creates a tight fit. Hammer drive anchors are commonly used in construction and industrial applications. They are also sometimes used in home improvement projects. Hammer type anchors are available in a variety of sizes and styles to suit different needs. These anchors are made from a variety of materials, including steel, brass, and plastic. 

Depends on the Size

They can be bought at hardware stores or online. These innovative anchors come in different sizes to accommodate different thicknesses of material. The size of the hole that needs to be drilled for the anchor also depends on the size of the anchor. They are easy to install and remove. They can be used with a hammer or an impact drill. When installing drive anchors, it is important to use the correct size drill bit. If the hole is too small, the anchor will not expand properly and may not hold securely. If the hole is too large, the anchor may spin when driven in and will not grip the material correctly.

Difficult to Remove

These tough and long-lasting anchors are strong and durable. They can be used in a variety of applications where a strong hold is needed. They are not recommended for use in soft materials such as drywall or plaster. They can also be difficult to remove once they are installed. There are a few different types of hammer drive anchors, including:

-Sleeve anchors

-Wedge anchors

-Drop-in anchors

-Machine screws

Sleeve anchors are the most common type of anchor. They are available in a variety of lengths and diameters to accommodate different thicknesses of material. Sleeve anchors have an internal thread that allows them to be screwed into place. Wedge anchors are another type of hammer drive anchor. They have a wedge-shaped tip that helps them grip the material better. Wedge anchors are available in different sizes to accommodate different thicknesses of material. Drop-in anchors are a third type of hammer drive anchor

Screwed into Place

They have a threaded body with a flush head. Drop-in anchors are installed by hammering them into place. Machine screws are the fourth type of drive anchor. They have a threaded body that is screwed into place. Machine screws are available in different lengths and diameters to accommodate different thicknesses of material. Hammer drive anchors are a versatile fastening solution for concrete and masonry applications. They are available in a variety of sizes and styles to suit different needs. They are easy to install and remove, and they provide a strong hold. When choosing these popular anchors, it is important to select the correct size and style for the application. Contact Coburn Myers today to learn more.

Leave a Reply

Your email address will not be published.